WeldROVER Weld Inspection

• Can support up to six probes for TOFD, phased array, or pulse-echo inspections
• Constant scanning speed control for smooth data acquisition at any speeds
• Compact motion controller allowing 10 different scan speeds from 5 mm/s to 50 mm/s
• Simple two-button remote control for jog or constant encoded motion either in backwards or forward direction
• Data acquisition using OmniScan or FOCUS instrumentation with less than 5 minutes configuration time
• The four industrial-strength magnetic wheels are driven for use on ferromagnetic surface
• Integrated water manifold for simple and efficient couplant delivery
• Emergency-stop button located on the scanner
• Laser guide indicator helps the operator to follow the weld centerline or any other inspection reference
• Room to integrate a remote pulser/preamplifier for improved TOFD-P/E inspections
• Divisible cable conduit umbilical offers cable protection and configuration flexibility. Minimal time needed for probe reconfiguration.
• Waterproof (IP65)

Specifications

Scanner speed: 5 mm to 50 mm per second
Encoder resolution: 2100 steps/mm (typical)
Power consumption: 90 W
Maximum input current: 4 A
Voltage: 24 VDC
Power supply input voltage: 100 VAC or 240 VAC, autoswitching

Standard inclusions

• Motorized scanner with rotating probe-holder arms at the front and back of the scanner
• 2 frame bars for probe-holder fixation of 200 mm (8 in.) and one of 340 mm (13.4 in.)
• Remote control with 5 m cable
• MCDC-01: one-axis DC motion controller
• Encoder cables linking MCDC-01 to the OmniScan®
• 6 spring-loaded arms (SLA) pivoting probe holders and all brackets needed for the different configurations
• 4 TOFD-P/E 31.75 mm yokes
• 2 PA 40 mm x 55 mm yokes
• 2 PA 40 mm x 65 mm yokes for PWZ1 probes
• Irrigation tubing and fittings
• Laser guide and holder
• Two steering lever
• 5 m divisible conduit for cable protection and attachment to the scanner.
• Power supply
• Scanner and accessories hard carrying case

Note: All cables for scanner operation are 5 m.
Probes and wedges are not included with the scanner.

Options:

• Electrical water pump (P/N: CFU03)
• Manual water pump (P/N: WTR-SPRAYER-8L)
• TomoScan Focus LT encoder cable adaptor (P/N: C1-DE15F-BXM-0.30M)
• Extra 5 m divisible cable conduit (P/N: OPTX0719)
• Extra spring-loaded probe holder (P/N: WELDROVER-A-SLA)
• Extra laser guide (P/N: WELDROVER-A-LASER)
• Modular instrument and accessories hard-carrying case. The modules can be used to transform the scanner case into a workstation. (P/N: WELDROVER-A-ICASE)
• Spare parts kit (P/N: WELDROVER-A-SPKIT)

For TOFD inspection:

• TRPP-5810 2-channel pulser/preamplifier (P/N: TRPP-5810)
• 5682 1-channel preamplifier (P/N: 5682)
• TOFD probes and wedges (see ordering information table)
• Extra TOFD/PE 31.75 mm yokes (P/N: ADIX689)
• UT probe cables
  • 5 m UT RG174 coaxial cable with LEMO-00 to LEMO-00 connectors (P/N: C174-LM-LM-5M)
  • 5 m UT RG174 coaxial cable with LEMO-00 to Microdot connectors (P/N: C174-LM-UDOT-5M)
  • 0.45 m UT RG174 coaxial cable with LEMO-00 to Microdot connectors (P/N: C174-LM-UDOT-0.45M)

For Phased Array inspection:

• PA probes and wedges (see ordering information table)
• 0.5 m PA extension cable with four UT connections
  (P/N: E128P0-0202-OM)
• PA probe splitter (P/N: OMNI-A-ADP05)
• Extra PA 40 mm x 55 mm yoke (P/N: ADIX655)
• Extra PA 40 mm x 65 mm yoke for PWZ1 probes (P/N: ADIX1082)