Panametrics-NDT Calibration Test Blocks

    Panametrics-NDT Calibration Test Blocks

    Calibration Test Blocks

    Calibration and/or Reference Blocks should be used in every application. Standard blocks are available for angle beam calibrations and thickness calibrations of common materials.

    1. Blocks manufactured from 1018 steel, 304 stainless steel, or 7075-T6 aluminum are commonly in stock (other materials require special quotes for price and delivery)
    2. Contact us for more information regarding materials not listed, blocks not listed, or custom blocks
     

    Calibration Blocks

    All blocks are checked dimensionally using measuring equipment traceable to the National Institute of Standards and Technology, NIST. The most commonly required calibration blocks are listed below.

    Type

    Part Number

    Description

    Case

    ASTM E164 Calibration

    IIW-Type Block

    		TB7541-XMeets AASHTO and AWS Type 1 block requirements. Calibrates distance and sensitivity settings. Measure refracted angle and sound exit point of angle beam transducers. U.S. customary units (inches).F129
    TB1136-XU.S. customary units (inches) block with Lucite® plugF129

    TB1054-X

    Metric Units

    F129

    TB1137-X

    Metric Units block with Lucite® plug

    F129

    US Air Force
    IIW-2 Calibration Block

    TB5939-X

    IIW-type block per U.S. Air Force NDI Manual T.O. 33B -1-1. Includes 2" and 4" radius cutouts for distance calibration. No. 3, No. 5 and No. 8 side drilled holes, and distance calibration marks to the 2" hole.

    F129

    RC AWS Block

    TB7543-X

    Determining resolution capabilities of angle beam transducers per AWS and AASHTO requirements.

    F157

    SC AWS Block

    TB7545-X

    Sensitivity and refracted angle calibration per AWS and AASHTO requirements.

    F158

    DC AWS Block

    TB7547-X

    Distance and beam index calibration for angle beam transducers per AWS and AASHTO requirements.

    F159

    DSC AWS Block

    TB7549-X

    Distance, sensitivity, refracted angle and beam index calibration for angle beam transducers per AWS and AASHTO requirements.

    F160

    DS AWS Block

    TB7551-X

    Calibration block for horizontal linearity and dB accuracy procedures per AWS and AASHTO requirements.

    F161

    30FBH Resolution Reference Block

    TB7160-X

    Evaluate near surface resolution and flaw size/depth sensitivity of UT equipment. No. 3, No. 5 and No. 8 ASTM flat bottom holes at ten metal travel distances from 0.050" to 1.250".

    Included

    NAVSHIPS Block

    TB7567-X

    Contains six No. 3 side drilled holes. Used for distance-amplitude calibration per NAVSHIPS 0900-006 -3010.

    F162

    ASTM E164 MAB Block

    TB7150-X

    Miniature Angle Beam (ROMPAS) Block. Distance, beam index, refracted angle and sensitivity calibration. One inch thick.

    F197

    ISO 7963 Steel

    TB1065-X

    Miniature Angle Beam Block Distance, beam index, refracted angle and sensitivity calibration. 25 mm thick.

    F197

    Replace the "X" in the part number with the appropriate number listed below to signify block material: 1 = 1018 Steel, 2 = 4340 Steel, 4 = 7075-T6 Aluminum, 5 = 304 Stainless Steel, 8 = 6-4 Titanium

    Reference Blocks

    We offer commonly used sets of reference blocks recommended by ASTM standards. These sets are all manufactured to ASTM E127 and ASTM E428 physical dimensions requirements. All reference blocks are provided with an ultrasonic response curve. We can provide, by special order, materials not listed and individual reference blocks. Contact us for more information regarding materials not listed, custom calibration blocks, or quotations on blocks not listed in this section.

    Type of Set*

    Part Number

    Description of Set

    Distance-
    Area
    Amplitude
    Set

    TB6100-X

    Set of 10 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) basic set consisting of 3/64 at 3", 5/64 at 1/8", 1/4", 1/2", 3/4", 1-1/2", 3", and 6", and 8/64 at 3" and 6". This set is used for determining Dead Zone, Sensitivity, Distance and Area Amplitude Linearity Measurement.

    Area-
    Amplitude
    Set

    TB6200-X

    Set of 8 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) Area Amplitude Set consisting of 1/64, 2/64, 3/64, 4/64, 5/64, 6/64, 7/64, and 8/64 Flat Bottom Holes at 3". This set is used to determine the relationship between flaw size and echo amplitude by comparing signal response.

    Distance-
    Amplitude
    Set-No. 3FBH

    TB6303-X

    Set of 19 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) Distance Amplitude Set. All Flat Bottom Holes are the same and metal travel distances are 1/16", 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/4", 1-3/4", 2-1/4", 2-3/4" 3-1/4", 3-3/4", 4-1/4", 4-3/4", 5-1/4", and 5-3/4". This set is used to determine the relationship between metal distance and signal amplitude by comparing signal responses obtained.

    Distance-
    Amplitude

    TB6305-X

    1/16"

    1/2"

    1"

    2-1/4"

    3-1/4"

    4-1/4"

    5-1/4"

    Set-No. 5FBH

    1/8"

    5/8"

    1-1/4"

    2-3/4"

    3-3/4"

    4-3/4"

    5-3/4"

    Distance-
    Amplitude

    TB6308-X

    1/4"

    3/4"

    1-3/4"

    Set-No. 8FBH

    3/8"

    7/8"

    Sensitivity-
    Resolution Set

    TB6025-X

    Set of 9 ASTM E 127 (7075 Alum) or ASTM E 428 (all other materials) consisting of 1/64 at 3"9, 2/64 at 3", and 5/64 at 1/8", 1/4" 3/8", 1/2", 3/4" 1" and 1-1/2", and 1 ASTM E 317 Horizontal and Vertical Linearity Block used to evaluate the sensitivity, entry surface resolution, and horizontal and vertical linearity characteristics of UT equipment.

    Replace the "X" in the part number with the appropriate number listed below to signify block material: 1 = 1018 Steel, 2 = 4340 Steel, 4 = 7075-T6 Aluminum, 5 = 304 Stainless Steel, 8 = 6-4 Titanium

    Thickness Calibration Blocks

    • Blocks are held to tighter tolerances than called out in ASTM E797 Code.

    Part Numbers

    Material

    Steps

    2211E

    304 Stainless Steel

    0.100", 0.200", 0.300", 0.400", 0.500"

    2211M

    304 Stainless Steel

    2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm, 12.5 mm

    2212E

    1018 Carbon Steel

    0.250", 0.500", 0.750", 1.00"

    2212M

    1018 Carbon Steel

    6.25 mm, 12.5 mm, 18.75 mm, 25 mm

    2213E

    7075-T6 Aluminum

    0.100", 0.200", 0.300", 0.400", 0.500"

    2213M

    7075-T6 Aluminum

    2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm, 12.5 mm

    2214E

    1018 Carbon Steel

    0.100", 0.200", 0.300", 0.400", 0.500"

    2214M

    1018 Carbon Steel

    2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm, 12.5 mm

    No reviews

    Panašūs

    Product added to wishlist
    Product added to compare.

    Ši svetainė naudoja slapukus

    Mes ir mūsų partneriai naudojame tokias technologijas kaip slapukai ir apdorojame asmens duomenis, pvz., IP adresą arba naršyklės informaciją, siekdami suasmeninti jums rodomą reklamą. Tai padeda mums rodyti jums aktualesnius skelbimus ir pagerina Jūsų interneto patirtį. Taip pat tai naudojame siekdami išmatuoti rezultatus arba suderinti savo svetainės turinį. Kadangi vertiname Jūsų privatumą, prašome Jūsų leidimo naudoti šias technologijas.