Cylindrical bent test 100mm incl mandrel set

SP1820The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519. A test panel (max. size 150 x 100 mm) is bent over a cylindrical mandrel. The smaller the diameter of the mandrel, the larger the tension on the coating. The test panel is then checked for cracks or damage in the coating. 

The luxurious desktop holder with 14 mandrels can also be wall mounted.

Mandatory test in Qualicoat, QIB and GSB accredited laboratories.

Read more: Cylindrical bent test 100mm incl mandrel set

Test panels

Test panelsTQC Panels are available in a large variety of dimensions, materials and thicknesses.
Use of TQC Test panels enhances reproducibility of physical and chemical tests.

Each panel is equipped with a hole for hanging and handling.

Not only standard test panels are available. Special dimensions to customers specifications are possible as well. Look up the brochure for more information about the assortment.

Read more: Test panels

Impact test

SP1880The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14

Read more: Impact test

Bend test conical mandrel

SP1830The TQC Bend Test Conical Mandrel is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or detachment from a metal test panel in accordance with ISO 6860 and ASTM D522. The conical shap of the bending area allows the deformation of the test panel and examination of the elasticity range of a coating over any diameter between 3.1 and 38 mm in one single test.

Read more: Bend test conical mandrel

Set of 14 mandrels for tqc cyl bend test 100mm

SP1835The TQC Bend Test Cylindrical Mandrels consists of 14 mandrels for the TQC Bend Test Cylindrical, a bend test for determining the elasticity of coatings in accordance with ISO 1519. A test panel (max. size 150x100mm) is bent over a cylindrical mandrel, the smaller the diameter of the mandrel, the greater the tension on the coating. The coating on the test panel is then checked for cracks or damage.

Read more: Set of 14 mandrels for tqc cyl bend test 100mm